38 lines
2.4 KiB
Markdown
38 lines
2.4 KiB
Markdown
来源：STM32 Cortex®-M4 MCUs and MPUs Programming Manual Rev 10，Page 51
|
||
|
||
The STM32 Cortex-M4 instruction set
|
||
|
||
**Table 21. Cortex-M4 instructions (continued)**
|
||
|
||
| Mnemonic | Operands | Brief description | Flags | Page |
|
||
|----------|----------|-------------------|-------|------|
|
||
| AND, ANDS | {Rd,} Rn, Op2 | Logical AND | N,Z,C | 3.5.2 on page 85 |
|
||
| ASR, ASRS | Rd, Rm, <Rs|#n> | Arithmetic shift right | N,Z,C | 3.5.3 on page 86 |
|
||
| B | label | Branch | — | 3.9.5 on page 142 |
|
||
| BFC | Rd, #lsb, #width | Bit field clear | — | 3.9.1 on page 139 |
|
||
| BFI | Rd, Rn, #lsb, #width | Bit field insert | — | 3.9.1 on page 139 |
|
||
| BIC, BICS | {Rd,} Rn, Op2 | Bit clear | N,Z,C | 3.5.2 on page 85 |
|
||
| BKPT | #imm | Breakpoint | — | 3.11.1 on page 181 |
|
||
| BL | label | Branch with link | — | 3.9.5 on page 142 |
|
||
| BLX | Rm | Branch indirect with link | — | 3.9.5 on page 142 |
|
||
| BX | Rm | Branch indirect | — | 3.9.5 on page 142 |
|
||
| CBNZ | Rn, label | Compare and branch if non zero | — | 3.9.6 on page 144 |
|
||
| CBZ | Rn, label | Compare and branch if zero | — | 3.9.6 on page 144 |
|
||
| CLREX | — | Clear exclusive | — | 3.4.9 on page 80 |
|
||
| CLZ | Rd, Rm | Count leading zeros | — | 3.5.4 on page 87 |
|
||
| CMN | Rn, Op2 | Compare negative | N,Z,C,V | 3.5.5 on page 88 |
|
||
| CMP | Rn, Op2 | Compare | N,Z,C,V | 3.5.5 on page 88 |
|
||
| CPSID | iflags | Change processor state, disable interrupts | — | 3.11.2 on page 182 |
|
||
| CPSIE | iflags | Change processor state, enable interrupts | — | 3.11.2 on page 182 |
|
||
| DMB | — | Data memory barrier | — | 3.11.4 on page 184 |
|
||
| DSB | — | Data synchronization barrier | — | 3.11.4 on page 184 |
|
||
| EOR, EORS | {Rd,} Rn, Op2 | Exclusive OR | N,Z,C | 3.5.2 on page 85 |
|
||
| ISB | — | Instruction synchronization barrier | — | 3.11.5 on page 185 |
|
||
| IT | — | If-then condition block | — | 3.9.7 on page 145 |
|
||
| LDM | Rn{!}, reglist | Load multiple registers, increment after | — | 3.4.6 on page 76 |
|
||
| LDMDB, LDMEA | Rn{!}, reglist | Load multiple registers, decrement before | — | 3.4.6 on page 76 |
|
||
| LDMFD, LDMIA | Rn{!}, reglist | Load multiple registers, increment after | — | 3.4.6 on page 76 |
|
||
| LDR | Rt, [Rn, #offset] | Load register with word | — | 3.4 on page 69 |
|
||
| LDRB, LDRBT | Rt, [Rn, #offset] | Load register with byte | — | 3.4 on page 69 |
|
||
| LDRD | Rt, Rt2, [Rn, #offset] | Load register with two bytes | — | 3.4.2 on page 71 |
|
||
| LDREX | Rt, [Rn, #offset] | Load register exclusive | — | 3.4.8 on page 79 | |